The digital fabrication podcast
…
continue reading
In this episode of the Meltone Podcast, Tom and Stefan dive into their recent experiences at the Open Source Maker event in San Francisco. They discuss the latest in 3D printing technology, including the acquisition of Micronics by Formlabs and a revolutionary FDM filament that boasts strength beyond aluminum. The episode also covers the dishearten…
…
continue reading
In Episode 74 of the Meltzone Podcast, Tom and Stefan revisit E3D’s extruder testing, debate the pros and cons of AC versus DC power for 3D printer heating elements, and discuss the contentious issue of patents in the 3D printing industry. They explore the challenges and implications of patents that may hinder innovation and affect content creators…
…
continue reading
![Artwork](/static/images/128pixel.png)
1
Did we do a bad job in testing extruders? (feat. E3D)
1:29:27
1:29:27
Na później
Na później
Listy
Polub
Polubione
1:29:27
This episode kicks off with Stefan sharing his recent trip to Cologne, aimed at discovering new products for his online store. They briefly discuss Tom’s video on threaded inserts, including testing methodologies and Stefan shares his story about tackling a TikTok impostor. A significant portion of the episode features an in-depth discussion with e…
…
continue reading
Thanks to Peopoly and their Magneto X for sponsoring this episode! Learn more at https://peopoly.net/products/magneto-x In this episode, the hosts start with a PSA about backing up data and Stefan’s SSD failing. Later, Tom shares his plans for SMRRF and Stefan reveals his intention to be present at both Formnext and SMMRF in 2023. The conversation…
…
continue reading
Stefan has just returned from OpenSauce, a recent Makerfair/Vidcon event held in San Francisco. He shares his thoughts about the event, including what he saw and missed out on. Tom and Stefan also chat about their six-week experience driving their new Tesla EV, and touch on the topic of solar charging. The duo then discuss the Ankermake M5C, which …
…
continue reading
![Artwork](/static/images/128pixel.png)
1
The man behind Marlin: How an open source project works!
1:35:48
1:35:48
Na później
Na później
Listy
Polub
Polubione
1:35:48
Join Tom and Stefan in this episode as they chat with Scott Lahteine, the mastermind behind the Marlin 3D Printer firmware. They delve into the workings of an open-source project, covering topics such as Scott’s role, time commitment, funding sources, and common challenges he faces. Support Scott and Marlin firmware: https://marlinfw.org/docs/devel…
…
continue reading
![Artwork](/static/images/128pixel.png)
1
3D Printer Manufacturer Shenanigans
1:24:01
1:24:01
Na później
Na później
Listy
Polub
Polubione
1:24:01
Thanks to Mintion for sponsoring this episode! Check out the Beagle Camera V2 at https://www.mintion.net/products/mintion-beagel-v2-3d-printer-camera and use code BGV2CAMSAS for $5 off! On this Podcast episode, Stefan asks Tom about his experience about dubbing his 3D Printing videos with a German audio track and why uploading to a new channel migh…
…
continue reading
![Artwork](/static/images/128pixel.png)
1
Rocky Mountain RepRap Festival & Prusa MK4
1:23:31
1:23:31
Na później
Na później
Listy
Polub
Polubione
1:23:31
On this Podcast episode, Stefan shares his latest acquisition, the Vectorfinesse’s 3D-printed headphones. The discussion then shifts to his recent trip to Loveland, Colorado, where he attended the Rocky Mountain RepRap Festival. Stefan shares some of the projects he witnessed and highlights the differences between this new event and MRRF and ERRF. …
…
continue reading
After a skipped episode due to a COVID break, Tom and Stefan are back talking about PV systems, irrigation systems, and electric snail fences. Tom started posting a couple of shorts, and Stefan is doing his first step in delegating work and will have an intern. Then they talk about the sweetest 3D printer, the Cocoa Press, and how the Kickstarter c…
…
continue reading
![Artwork](/static/images/128pixel.png)
1
Back again! Rotary CNC & Simplify3D V5 meme is over
1:49:42
1:49:42
Na później
Na później
Listy
Polub
Polubione
1:49:42
Tom and Stefan are finally back with a new episode. They talk about why they were gone and what projects Tom recently enjoyed working on, like the NERF he used as an intro in his last video and rotary machining on the Snapmaker. Then they discuss all of the recent developments in Slicers with PrusaSlicer 2.6 and, believe it or not, Simplify V5. To …
…
continue reading
![Artwork](/static/images/128pixel.png)
1
New Bambulab P1P & Creality "Laser Eye Surgery" at Formnext 2022
1:35:31
1:35:31
Na później
Na później
Listy
Polub
Polubione
1:35:31
This episode starts with a quick chat about solar batteries because Stefan was faced with a power outage on the morning of the recording. After that Tom and Stefan switch over to a discussion about new ways of 3D scanning and AI image and video generation. Then they talk about Bambulabs’ next budget printer, the P1P, and also touch on why there mig…
…
continue reading
![Artwork](/static/images/128pixel.png)
1
When 3D printing isn't the right solution
1:37:31
1:37:31
Na później
Na później
Listy
Polub
Polubione
1:37:31
Thanks to Bekonix for sponsoring this episode! Check them out at https://bekonix.com and use code MELTZONE for 3 months of Pro access for free. In this episode, Tom and Stefan talk about the reasons why this Podcast was postponed for so long which covers, ERRF, new/old studio, and taxes. Then they talk about Formnext 2022 that’s right around the co…
…
continue reading
![Artwork](/static/images/128pixel.png)
1
Back to the new old Studio & Cherry-picked Review Units?
1:20:02
1:20:02
Na później
Na później
Listy
Polub
Polubione
1:20:02
This episode is not only about chatting and chicken but also a little update on Tom’s move back to his new old studio and his plans to completely move in before he flies out to ERRF2022. After a bit of rambling, Tom and Stefan talk about a 3D printed robot arm, Fusions360s implementation of lattice structures, and an open-source high-temperature 3D…
…
continue reading
![Artwork](/static/images/128pixel.png)
1
Bambu VS Voron VS Prusa XL & Kicked out of the Studio?
1:16:10
1:16:10
Na później
Na później
Listy
Polub
Polubione
1:16:10
This episode starts with a short and frustrating story on why Tom might have to leave his new studio again. Next, Stefan and Tom talk about Corridor Crews YouTube channels once again, which recently was hacked. Stefan gives a quick insight into his new home automation setup that sends him notifications once a print is finished. Then there is a quic…
…
continue reading
![Artwork](/static/images/128pixel.png)
1
Prusa XL Delayed, Scams & NoZZles
1:30:17
1:30:17
Na później
Na później
Listy
Polub
Polubione
1:30:17
Thanks to Siraya Tech for sponsoring this episode! Check them out at https://siraya.tech/products/build-resin-high-resolution-engineering-resin or on Amazon at http://go.toms3d.org/Siraya In this episode, Stefan talks about what recently put him out of order for almost 4 weeks but how he used the time to discover some amazing new channels. Tom talk…
…
continue reading
![Artwork](/static/images/128pixel.png)
1
Why stuff breaks, Robot Arms & Home-Compostable PHA Filaments
1:43:17
1:43:17
Na później
Na później
Listy
Polub
Polubione
1:43:17
Thanks to Private Internet Access for sponsoring this episode! Check them out at https://www.privateinternetaccess.com/TheMeltzone This episode starts with a discussion about the longevity of common 3D printing materials and why sometimes filament snaps on its own in the Bowden tube. Next, Tom and Stefan take a look at Formlabs’ new FUSE 1+ 3D prin…
…
continue reading
![Artwork](/static/images/128pixel.png)
1
I caught Covid at MRRF2022 & Slicing Revolution in CURA and PrusaSlicer
1:07:48
1:07:48
Na później
Na później
Listy
Polub
Polubione
1:07:48
This episode is sponsored by Linode! Check out their scalable cloud solutions and get $100 free credit at https://linode.com/themeltzone This episode is slightly different because Stefan records it straight from Covid isolation which he caught, as many others, at this year’s Midwest Reprap Festival in Goshen, IN. After a short status check and some…
…
continue reading
![Artwork](/static/images/128pixel.png)
1
Anker Make M5 & BCM3Ds novel resin printing method
1:22:45
1:22:45
Na później
Na później
Listy
Polub
Polubione
1:22:45
This episode is sponsored by Linode! Check out their scalable cloud solutions and get $100 free credit at https://linode.com/themeltzone This episode starts with a quick update on Tom’s new studio as well as the office space Stefan has an eye on. Next, Stefan quickly tells the story of how All3D has been using content from a ton of creators without…
…
continue reading
![Artwork](/static/images/128pixel.png)
1
Dream Studio, Macro Photography & Sneaky 3D Printing Quiz
1:28:07
1:28:07
Na później
Na później
Listy
Polub
Polubione
1:28:07
In this episode, Tom talks about finally finding his dream studio and office space! Both Tom and Stefan recently reviewed professional machines where they got a ton of negative feedback from viewers that made comparisons to maker and DIY tools. They ask themselves if there is space for taking a look at professional machines on their channels or if …
…
continue reading
![Artwork](/static/images/128pixel.png)
1
Simplify3D V5 "confirmed" & REVO problems
1:24:47
1:24:47
Na później
Na później
Listy
Polub
Polubione
1:24:47
The first topic of this episode covers a controversial article where the author “has the feeling” that the release of S3D V5 might not be far away though there is very little substance to that claim. More substantial news is that Anker, the power bank and electronics accessories maker, will get into the 3D printer market and will launch their first…
…
continue reading
![Artwork](/static/images/128pixel.png)
1
Is "exposure" enough payment & German channel?
1:08:23
1:08:23
Na później
Na później
Listy
Polub
Polubione
1:08:23
This episode starts with the question of whether content creators should have to license 3D printable models that others released under a non-commercial license or if the exposure alone is enough “payment”. If you would license your creation how would you even do that? Then there are rumors that Anet, the infamous maker of the Anet A8 is gone from …
…
continue reading
![Artwork](/static/images/128pixel.png)
1
Open Source CAD & Selling Stuff Online
1:38:57
1:38:57
Na później
Na później
Listy
Polub
Polubione
1:38:57
This episode is sponsored by JLCPCB. Take a look at their new online store for PCBs and 3D Designs: https://jlcpcb.store/collections/all JLCPCB also offers affordable yet high-quality PCBs starting at $2 for 5 boards: https://jlcpcb.com/RHS This episode starts with a short chat about the festive season and the presents Tom and Stefan got, followed …
…
continue reading
![Artwork](/static/images/128pixel.png)
1
Prusa XL (obviously) & Creality MMU?!
1:48:44
1:48:44
Na później
Na później
Listy
Polub
Polubione
1:48:44
This podcast episode covers the physics behind Stefans recently reviewed CHT nozzle and his DIY version of it. Both discuss the advantages and disadvantages of this design and how it compares to a Volcano hotend. Stefan briefly talks about how he got kicked from AMAZON with his threaded inserts. The big topic is the Prusa XL and its new, smart feat…
…
continue reading
![Artwork](/static/images/128pixel.png)
1
Thingiverse Data Breach & Molten Prusa Heaterblock
1:20:59
1:20:59
Na później
Na później
Listy
Polub
Polubione
1:20:59
The episode starts with a quick discussion about recent events and the state of this year’s Formnext visit. Next Tom and Stefan talk about the recent Thingiverse Data Breach, how it was handled, and that this is just another nail in the coffin. This is followed by a discussion about Thingiverse alternatives and Prusa’s plans of re-branding PrusaPri…
…
continue reading
![Artwork](/static/images/128pixel.png)
1
E3D Revo & Thingiverse Robs Creators
1:50:44
1:50:44
Na później
Na później
Listy
Polub
Polubione
1:50:44
The first episode after the summer break covers E3Ds new Revo extrusion system and Prusa Automated Farm System that they are currently demonstrating in Dubai. Stefan quickly talks about his line-up of threaded inserts that he recently launched ((affiliate) https://geni.us/CNCKitchenInserts) and Tom gives his impression about the SL1S Upgrade that h…
…
continue reading